HGUC #022 MSN-02 ZEONG

HGUC

Includes

• Zeong
• Display Stand

Kit Features & Gimmicks

• The mono-eye sticker can be placed in a different position (keep in mind that this is a one-time method before deciding how to apply).

Articulation

• The head can only rotate on a ball-and-socket joint.
• Neck-collar construction can tilt back and forth.
• When slightly pulled out, the shoulder joints can swing frontwards/backwards in an extent.
• The arms can…
  • Swing on a peg-and-socket joint.
  • Raise horizontally.
• The upper arms can rotate.
• Elbow joints can be bent up to roughly 30 degrees.
• The manipulators…
  • Can swivel on a ball-and-socket joint.
  • Features fully articulated fingers but there is no knuckle articulation.
• Waist joint can tilt back and forth.

Weapons/Other Gimmicks

• The kit can be connected to the provided display base via a polycap joint, allowing the kit to be displayed at an angle.
• Head can be optionally detached from the body for individual display.
• Arms can be detached and connected with the provided cable for displaying with the 5-barrel Mega Particle Guns deployed.
• The thrusters underneath the skirt armor can pivot.

Tips & Tricks

• For better results, some or most of the details are needed to be applied with Gundam Markers or Mr. Color paints.
• Topcoat (Mr. Hobby recommended) can be used to protect applied stickers and if any, marking decals and painted details.
  • If using matte/flat-finish top coat, it is advisable not to spray on the translucent parts – can be done by masking or spraying top coat while the said parts are separated.
• Section 19 of the instruction manual provides a 100-mm measurement that can be used for accurately cutting the cable.