Liang Model LIANG-0432 1/48 1/72 Modern Beer Soda Bottle Crates x8

Tips for using 3D-print parts
1. Some 3D-print parts may have slight layer patterns or pixel patterns. Please spray primer before using.
2. If the part is bent and deformed, please use hot water or a hair dryer to heat it and correct it.
3. If there is residual resin or debris on the surface of the parts, it is recommended to clean them with alcohol.
4. 3D-print parts are relatively fragile. If they break during transportation, please use CA glue to adhesive.
5. Before using transparent 3D-print parts, please spray 2-3 layers of varnish to enhance the permeability.